Year: 2017

First Impression on the Xiaomi WiFi+

Here a first look at the Xiaomi WiFi+ PCB and Software is given.

Setting-up OpenPLC

The OpenPLC is a opensource Programmable Logic Controllers (PLC) alternative. Due to this, it is possible to understand the black box of these systems. It could be easily used with a Raspberry Pi.

Analysis of Mini 3G/4G WiFi Wireless Router (A5-V11)

Coreboot debugging, configuration, tint, etc.

Coreboot provides a lot of possibilities of configurations, primary and secondary payloads and debugging mechanisms.

Flashing Coreboot on the T430 with a Raspberry Pi

Coreboot is an Open Source project, which replaces the proprietary BIOS of a traditional computer. Coreboot initialize the Hardware and then executes a payload (e. g. SeaBIOS or Grub).

Open Source Risc-V on the Xilinx Artix-7 35T Arty – Part 2

With OpenOCD it is possible to flash/upload programs to the spi flash of the Arty Board. From there the SiFive Risc-V “core” will boot.

Open Source Risc-V on the Xilinx Artix-7 35T Arty – Part 1

Configuring and programming the 100 € Xilinx Arty development board with an open source implementation of the Risc-V ISA from SiFive.

Hacking – Root @ Linksys E900 N300

How to get root at Linksys E900 N300

Hacking – Root @ NETGEAR DM111PBL ADSL2+

How to get a root shell on the NETGEAR DM111PBL?

Mirai Soruce Code Reveals Bad IoT Passwords

The Mirai source code reveals the passwords, which are used to create the botnet. These passwords should never ever be used to secure a device.

Hacking IP-Camera Digoo BB-M2 – Part 3 – Getting root access

After getting access to the serial interface of the IP-Camera the next step is to get a root shell.

Hacking IP-Camera Digoo BB-M2 – Part 2 – Analyzing the boot process

The last article shows, how to identify the serial port on the IP-Camera. With this it is possible to solder wires on the IP-Camera and attach a USB to serial adapter to it.

Top